Factsheets - Mould in bathrooms & showers

Whilst all advice given is correct to the best of our knowledge, we cannot be held responsible for any problems should you choose to take our advice. If you’d like some advice on any of these issues, contact our London plumbers on 0208 964 6714.

Plumbing Glossary
Emergency plumbing
What to look for in a good plumber

How to disconnect & reconnect a washing machine
How to disconnect & reconnect a dishwasher
Buying a bathroom suite
Purchasing a Shower
Showers - flow and control
Showers - choosing a tray and door
Mould in bathrooms and showers
Taps and shower valves
How to replace a tap washer
How to replace tap cartridge for quarter turn taps

Earth bonding
Preparing for winter
Advice when doing building work

Power showering in flats
Water pressure
Pressure and stored hot water
Flow and pressure
Water softeners

Boiler problems – what to look out for and when to contact a plumber
How to tell if it’s time to replace your boiler
Boiler breakdowns
Things to consider when looking for a new boiler
Heating Systems - sealed or vented?
Flushing your heating system
How to stop cold spots in your radiators
How to look after your home central heating
Gas Rating
Asbestos Awareness

Please call us for queries or help with anything on 0208 964 6714 (24 hours a day)

Mould (mildew) in Bathrooms and Showers

Mould is a perennial problem in bathrooms and showers, as it is its perfect environment to grow and thrive.

Mould needs three things to grow:

• Moisture to enable germination.
• A food source – soap and dirt.
• Warmth to promote growth.

The reason that mould tends to grow on silicone sealant is because it is warmer than the surrounding tiles or ceramics.

Mould has two stages of attack

• Primary attack, which sits on the surface
• Secondary attack where the mould starts growing into the sealant, eating into it.

The sealants used on baths have “Mildew Resistance” which is limited and after a time the fungicide in the sealant is exhausted letting the mould grow and flourish.

There are proprietary fungicides (mould sprays) that can be bought in plumber's merchants and hardware stores to combat mould. They are essentially powerful bleaches and should be used with care (following the manufacturers instructions).

It is critical to keep surfaces where mould can grow clean. Wiping the surface regularly and applying mould spray when it is found means that the mould cannot go beyond the primary phase. This should assure that the mould is kept under control and does not destroy the sealant damaging or destroying the water seal.

This data was taken from technical advice from GSL Technical 024 764 66603 (the main support group for Dow Corning Sealants)